CHYRON Corporation
Message Compose Basics 6-30 Revision D
See Section 21 for information on RGB Tools, and
§21.6 and §21.6.1 for information on scale and
aspect ratio.
•
Transform: The aspect ratio is automatically set to
.75. Note that to play back properly in 16 X 9, the
objects must have been created in 16 X 9 aspect ratio
before entering Transform. For example, to play
back a circle that was created in 4 X 3, it must be
scaled to .75 to play back as a circle in 16 X 9.
See the Transform Option Handbook (Pub. No.
2A01993, Rev. C) for complete information on Trans-
form.
To set
Aspect Ratio to 16 X 9:
• Press
SET-UP, then press E or select 16 X 9. The
icon becomes highlighted.
To set
Aspect Ratio to 4 X 3,
• Press
SET-UP, then press E or select 16 X 9. The
icon becomes unhighlighted.
7\SLFDO2SHUDWLRQDO6HTXHQFH
A typical first session on an iNFiNiT! Family system
proceeds as follows:
[ ] 1. Power the system up. After diagnostic checks,
the Operating System loads from the Hard
Drive. Down the right edge of the Prompts
Monitor, the system displays the Program
Loader menu, showing the available programs.
[ ] 2. If no Machine Fonts are on disk yet, load the
Font Create or Advanced Font Create
(optional) program, and convert several Master
Fonts into Machine Fonts (Section 18).
[ ] 3. Exit from Font Create or Advanced Font
Create. Load Message Compose.
To Next Page
Loading...