Chyron infinit! series - 16.9.2.2 Swapping Buffer Contents; 16.9.2.3 Non-Sequential Messages

CHYRON Corporation
Mix Effects 16-18 Revision D
 6ZDSSLQJ%XIIHU&RQWHQWV
The DO key swaps the contents of the displayed buffer
with the contents of the
READ NEXT buffer.
For example, if you have a message whose ID number is
100 already displayed on screen, and a message whose
ID number is 101 is in the
READ NEXT buffer, the fol-
lowing occurs:
When you press the
DO key, the contents of the READ
NEXT
buffer (101) displays on screen as per the Mix
Effect.
The contents of the buffer (100) that was replaced by the
effect is now transferred to the
READ NEXT buffer.
When you press the
DO key again, the message that was
originally displayed on screen (100) appears as per the
Mix Effect.
The contents of the buffer (101) that was replaced by the
effect is now transferred to the
READ NEXT buffer.
 1RQ 6HTXHQWLDO0HVVDJHV
Messages with ID numbers that are not in order can be
executed in any order using the
DO key as follows:
[ ] 1. Change active buffer (which can be assigned to
either CHANNEL A or B) to the one set at
0%
Output Percentage level.
OR...
Change the Output Percentage level setting of
the active buffer (which can be assigned to
either CHANNEL A or B) to
0, and the Output
Percentage level of remaining buffer (which
can be assigned to either CHANNEL A or B)
to
100.