CHYRON Corporation
Mix Effects 16-32 Revision D
5HFDOO0L[3UHVHWV
To recall a Mix Effects preset:
[ ] 1. If the presets are saved as a message, enter the
Message Compose main menu.
[ ] 2. Press
CLR, then enter the ID number of the
message.
Mix Message read appears on the Prompt
Line.
[ ] 3. Press
MIX to enter the Mix Effects main menu.
[ ] 4. Press
CNTL R or select Recall Mix.
The Restore Mix Presets window (Figure 16-
13) is displayed.
Figure 16-13. Restore Mix Presets Window
[ ] 5. Press CLR, then enter the Read Effect preset
number using the Address Keypad.
If there is no preset stored at the number you entered,
MIX SETTINGS PRESET n WAS NEVER SAVED
appears on the Prompt Line, where
n is the number that
was entered. Try entering a different preset number.
[ ] 6. Press
.
[ ] 7. Execute Mix Effects.
Restore Mix Presets
preset number: 0
To Next Page
Loading...