iNFiNiT! Family Operation Manual
Revision D 16-31 Mix Effects
The following window is displayed:
Figure 16-12. Save Mix Presets Window
[ ] 2. Press CLR. Enter a number from 0 to 99, then
press
.
[ ] 3. Repeat Steps 1 and 2 for each preset you want
to save.
If there already is a preset recorded at a number that you
entered, it is overwritten with no confirmation.
Saved
current mix settings at preset n
(where n is the number
that was entered) is displayed on the Prompt Line. Make
a note of your preset numbers - a list of presets cannot be
displayed.
This method saves presets temporarily. To save the pre-
sets (up to 100) to a directory:
[ ] 1. Exit the Mix Effects main menu by pressing
MIX, Q, CNTL Q or selecting Quit.
[ ] 2. In the Message Compose main menu, press
CLR, then enter an empty message ID number
using the Address Keypad.
[ ] 3. Press
CNTL RCD M.
You can save different groups of presets under different
message numbers. This can be especially useful if you
work on more than one show in the same studio.
Save Mix Presets
preset number: 0
To Next Page
Loading...