Chyron infinit! series - 7.4.6 Record, Save, Read, Delete Tabs; 7.4.6.1 Record Tab Message (RCD); 7.4.6.2 Read Tab Message (READ); 7.4.6.3 Delete Tab Message (DEL MSG)

iNFiNiT! Family Operation Manual
Revision D 7-29 Formatting & Editing
• To delete a single row of tab fields, press DEL ROW
while in the Tab Setup Mode.
• To delete all tab fields, press
ERASE.
• To delete all tab fields and text from the screen, enter
the Message Compose main menu, then press
ERASE.
• To delete only the text and leave the tabs, enter the
Message Compose main menu, then press
CNTL
ERASE
.
 5HFRUG6DYH5HDG'HOHWH7DEV
A page of tab settings can be recorded, read and deleted
like a regular Full Page message.
 5HFRUG7DE0HVVDJH5&'
• To record a Tab message while in Tab Setup Mode,
enter an empty ID number using the Address Key-
pad, then press
RCD. All Tab position information
and attributes assigned to each Tab field are pre-
served.
 5HDG7DE0HVVDJH5($'
• To read the Tab message from within Tab Setup
Mode, enter the Tab message ID number into the
Address Keypad, then press
READ.
• To read a Tab message while in the Message Com-
pose main menu, enter the Tab message ID number
using the Address Keypad, then press
READ.
 'HOHWH7DE0HVVDJH'(/06*
• To delete a Tab message from within Tab Setup
Mode, enter the Tab message ID number using the
Address Keypad, then press
DEL MSG.