CHYRON Corporation
Multiple Effects 17-12 Revision D
Crawl of Template Data messages is not supported in
Multiple Effects
NOTE
Crawl executes at the location of the
cursor on the first message in the
Crawl. For example, if you want the
Crawl to execute on the top row, the
cursor must be positioned on the top
row at the time the first message was
recorded.
)DGH
When Mix is selected in the Multiple Effects window,
Fade can be used to fade both channels up or down; or
one up and one down.
Fade Output Percentage levels are
set in the Mix Settings window (§17.5 and §17.5.2).
If the Output Percentage levels for CHANNELS A and B
are the set to the same value, both channels fade up or
down to their complementary value of
100%. For exam-
ple, if A and B are both
80%, executing Fade fades both
buffers down to
20%. Executing Fade again fades both
CHANNELS to
80%.
If the Output Percentage levels for CHANNELS A and B
are the set to different values, CHANNEL A fades to
CHANNEL B’s Output Percentage level, and CHAN-
NEL B fades to CHANNEL A’s Output Percentage level.
For example, if A is set to
75% and B is set to 30%, A
fades down to
30% and B fades up to 75%. When Fade
is executed again, A fades up to
75% and B fades down
to
30%.
Ease and Rev (Reverse) are not available to Fade.
To Next Page
Loading...