iNFiNiT! Family Operation Manual
Revision D 15-25 Advanced Read FX
[ ] 3. Press CNTL R or select Read FX to enter the
Read Effects main menu.
[ ] 4. Press
CNTL R or select the Recall fx icon. The
following window is displayed.
Figure 15-10. Restore Fx Presets Window
[ ] 5. Press CLR, then enter the Read Effect preset
number.
If there is no preset stored at the number you
entered,
Fx setting preset n was never saved
appears on the Prompt Line, where n is the
number you entered. Try entering a different
preset number.
[ ] 6. Press
.
Restored fx settings from preset n appears
on the prompt line, where
n indicates the preset
number.
[ ] 7. Execute Read Effects.
([LWLQJ5HDG(IIHFWV
To exit Read Effects:
• Press
Q, CNTL Q, ESC, select Quit or click the right
mouse button.
Settings are saved until exiting Message Compose, or
rebooting or turning off system.
Restore Fx Presets
preset number: 0
To Next Page