iNFiNiT! Family Operation Manual
Revision D 8-59 Directory Features
6&6,([SUHVV5HDG
[ ] 1. Using the Address Keypad, press CLR, then
enter the ID number of the Still on the SCSI
Express drive that you want to read.
[ ] 2. Press the
SCSI Express key.
[ ] 3. Press
READ. The Still is read from the SCSI
Express drive, however, the current directory
remains that which was set in Message
Compose.
6&6,([SUHVV5HFRUG
[ ] 1. Display an image to be recorded.
[ ] 2. Using the Address Keypad, press
CLR, then
enter the ID number where you want the Still
to be recorded on the SCSI Express drive.
[ ] 3. Press the
SCSI Express key.
[ ] 4. Press
RCD. The Still is recorded to the
directory set in the Setup SCSI Express
window. However, the current directory
remains that which was set in Message
Compose.
0XOWLSOH.H\6HTXHQFHV
The SCSI Express key can be used in most multiple key
sequences, and the
SCSI Express key can be pressed
anywhere in the keystroke sequence. For example, to
read a Still into the background of an Extended Effects
Frame Buffer, the keystrokes can be entered in any of the
following ways:
• SCSI Express CNTL ALT READ
• CNTL SCSI Express ALT READ
• CNTL ALT SCSI Express READ
To Next Page
Loading...