CHYRON Corporation
Video Input Option 20-20 Revision D
Key Offset Key Offset provides small adjustments to advance or
delay the 601 Key input with respect to the 601 video
input. You may adjust this slider control in the same
manner described above.
5*%9LGHR,QSXW&RQILJXUDWLRQ
0$;,1(
NOTE
The MAXINE! VIM is calibrated for
GAIN = 50 & BLACK = 50. Always set
BLACK before setting GAIN.
Black
The Black slider adjusts the brightness of the image,
more specifically the black level with respect to the video
source. Set the slider so that a black input results in a
black (0 level) output.
Gain The Gain slider adjusts the contrast of the image, more
specifically, the level of the incoming video signal with
respect to the output level of the video source. Always
set Black before setting Gain!
Set the slider as described above, so that a white input
results in a white (max level) output.
Delay This slider allows the horizontal phase of the RGB inputs
to be adjusted with respect to MAXINE!’s timing, in sin-
gle-pixel increments.
5HFRUGLQJ5HDGLQJ
9LGHR,QSXW&RQILJXUDWLRQ
NOTE
There are no menu icons for the Read
or Record Video Input Configuration
functions.
To Next Page
Loading...