Chyron infinit! series - 6.7.1 DISPLAY - Viewing a Sample Character; 6.7.2 Select List - Searching a Font List

iNFiNiT! Family Operation Manual
Revision D 6-17 Message Compose Basics
 ',63/$< 
9LH Z LQJD6DPSO H& KDUDFWHU
To view a sample character in a font displayed in the list:
• Highlight the font using the cursor keys, then select
the
Display icon in the Font Load menu or press D.
The sample character displayed is an upper case "
A". If
this character doesn't exist in the font, the character with
the next ID (for example, upper case "
B") is shown.
The sample character is always displayed in the upper
left corner of the Edit Monitor. The current content of
the monitor, if overwritten by the sample, is undisturbed,
and can be recalled by pressing the
BUILD key (the blank
key between the
HOME and COLOR FONT keys).
 6HOHFW/LVW6 HDUFKLQJD )RQ W/LVW
Manual Correction: It is not necessary to separately
delete characters to clear a field in the Selective List win-
dow. Just press
CLR. Additionally, in order to enter
information into a field, the field must be highlighted.
To display a list of fonts by ID, name, Font Size, Edge
Size, Edge Type, Edge Direction or a combination of
these parameters:
• Select the
Select List icon or press S.
The Selective Listing menu appears: