Chyron infinit! series - 17.6.3 Pri (Priority); 17.6.4 Erasing Transform Image

CHYRON Corporation
Multiple Effects 17-32 Revision D
 3UL3ULRULW\
This Pri: field indicates the display priority for executing
Multiple Effects.
To set
Pri:
• Place the cursor on the
Pri: field, then press the
SPACE BAR or click to toggle to the desired choice.
The
Pri: setting is reflected in the Transform Control
window in Mix Effects (§16.16).
 (UDVLQJ7UDQVIRUP,PDJH
When a Transform Script is loaded, the first frame of the
Transform Script is displayed, even though the Transform
Script executes from its set position on the Time Line. In
addition, the last frame of the Transform stays on screen
when the Transform finishes executing.
If you do not want a Transform image to stay on screen
either before or after execution, make sure that the Trans-
form starts and/or ends off the screen. Any alteration of
this type must be done from within the Transform main
menu (
CNTL T), and then recorded and reloaded.
There are a number of ways to remove a Transform
image from the screen:
• Turn off the Transform output by changing the
Pri:
field to
Frame Only.
Frame Pri
Text and/or graphics message(s) is displayed over the Trans-
form Script.
Xform Pri
The Transform Script is displayed over text and/or graphics
message(s).
Frame Only Only text and/or graphics messages is be displayed.
Xform Only
Only the Transform Script is displayed.