Chyron infinit! series - 23.3 SCSI Express Setup; 23.3.1 Power Up

CHYRON Corporation
Total Motion Control 23-4 Revision D
Total Motion Control: An iNFiNiT! Family Option that
allows capture of live video and playback of that video or
pre-recorded animations.
 6&6,([SUHVV6HWXS
The initial setup of SCSI Express involves configuring
the SCSI Express disk unit(s) using Disk Utilities and
setting up a default directory for Message Compose. If
using IMAGESTOR!, a SCSI Express drive can be speci-
fied as a default Still directory in the IMAGESTOR!
Configure menu, however, it is not necessary. SCSI
Express supports up to four disk drives, specified as
Z, Y,
X and W.
NOTE
Before files can be copied to the SCSI
Express drive, the drive must be
formatted using Disk Utilities. A high
level format of a SCSI Express drive,
which performs only what is
necessary to make the SCSI drive
accessible to the iNFiNiT! Family
system, takes about a minute to
complete. A low-level format of a
SCSI Express disk takes over two
hours to complete. This type of
format scans each sector, and
automatically remaps bad sectors.
The Disk Utilities COPY feature
copies only Stills, CMF animations or
JPEG files to a SCSI Express drive.
No other message types are
supported.
 3RZHU8S
• Power up the external SCSI device, then power up
the iNFiNiT!, MAX!> or MAXINE! system.