Chyron infinit! series - 18.5 Function Icons; 18.6 Font Conversion Setup

iNFiNiT! Family Operation Manual
Revision D 18-17 Font Create Utility
 )XQFWLRQ,FRQV
CNTL C: Executes the conversion of a Master
Font(s) to a Machine Font(s) (§18.8).
CNTL P: Displays the default Character
Placement Table, which can be edited to create a
custom table (§18.7).
CNTL L: Displays the available Master Fonts
stored on the currently selected disk (§18.4.1).
CNTL O: In the Font Convert Setup window
(§18.4 and §18.4.8), copies the information
contained in the row that the cursor is on to a
paste buffer.
CNTL A: In the Font Convert Setup window
(§18.4 and §18.4.8), pastes the contents of the
paste buffer onto the row that the cursor is on.
• Press
CNTL to toggle between the Font Convert
Setup window and the function icons.
 )RQW&RQYHUVLRQ6HWXS
A Font Conversion List must be set up prior to convert-
ing a Master Font(s) to a Machine Font(s). At a mini-
mum, a Master Font ID number, a Machine Font ID
number, and a Font Size must be entered for each Master
Font that is to be converted. Up to 98 fonts can be
entered in the list for conversion at one time.
The ability to convert one or more fonts can be limited by
the amount of memory available. More complex (for
example, an edged font) Machine Fonts occupy more
memory and take longer to convert.
Convert
C
Placement
P
List
L
Copy
O
Paste
A