Chyron infinit! series - 6.7.5 Remove, ERASE ALL; 6.8 Message Compose Setup Menu

iNFiNiT! Family Operation Manual
Revision D 6-27 Message Compose Basics
 5HPRYH(5$6($//
To erase a single font from the list:
• Highlight the font, then press
R or select Remove.
To erase the fonts from all of the 16 Font Keys:
•Press
E or select the Erase All icon from either the
main Font Load window or the Fonts Loaded window.
The Fonts Loaded list now shows
Empty Font for all
Font Key positions.
These functions only erase the fonts from RAM, not from
the disk. They can be easily be reloaded later using one
of the font load procedures (§6.6).
 0HVVDJH&RPSRVH6HWXS0HQX
While in the Message Compose main menu, the SET-UP
key allows you establish conditions for commonly used
functions. Tabs, Function Keys, the Safe Title Box, and a
variety of defaults for each message directory can be set.
In addition, Roll and Crawl Control buffer Lists can be
created in order to execute Rolls and Crawls.
To display the Message Compose Setup menu:
• Press
SET-UP. The Setup menu is displayed along
the right side of the main menu.