Chyron infinit! series - 20.5.6 Source Selection (MAXINE!)

CHYRON Corporation
Video Input Option 20-10 Revision D
 6RXUFH6HOHFWLRQ0$;,1(
NOTE
The Source: field appears only if both
the CCIR601 and VIM options are
installed.
Source Selection allows you to select the video input
source - either RGB video from the Video Input Module,
or CCIR601 digital video from the 601 Digital Video
option.
Browse
Use Browse to browse through the captured frames
in the Frame Buffer.
• Highlight the
Browse field, then press the
SPACE BAR or SHIFT CHAR + Î or Ï; or
click on the arrows to browse through the cap-
tured frames.
Record (RCD)
This function records the currently-displayed frame
as an RGB message.
[ ] 1. Press
RCD or select Record.
The Record RGB Message window is
displayed.
[ ] 2. Enter the requested information.
Reset (R)
This function clears the Frame Buffer memory to
enable Flash Save to capture additional frames.
• Press
R or select Reset.