CHYRON Corporation
Start-Up 3-24 Revision D
0$;,1(6\QF$GMXVWPHQWV
To enter the Sync Control menu, select the item by press-
ing the
SPACE BAR. The MAXINE! Sync Control win-
dow (Figure 3-19) is displayed.
NOTE
This menu’s contents/layout are
based on the specific system con-
figuration. Therefore, your menu may
appear differently from Figure 3-19.
Sync Control:
This item brings up the Sync Control menu (Figure 3-
19), which contains a variety of sync settings. Sync
Control is described below.
Chroma
Boost:
Analog Sync Generator-equipped systems only.
Chroma Boost enables the system to generate super-
saturated colors. HOWEVER! Chroma Boost raises
the Chroma level system-wide, and it is possible to
generate illegal composite video levels.
Therefore,
use this feature with extreme caution!
Genlock
Source:
601 Digital Sync Generator-equipped systems only.
Genlock Source selects the source of the genlock sig-
nal. Press the
SPACE BAR to cycle through the
available choices: 601 (system genlocks to the 601
video input), Analog (system genlocks to the REF IN
input), or Free Run (genlock function disabled.).
Gamma Out:
601 Digital Sync Generator-equipped systems only.
Gamma Out enables you to select the proper gamma
correction value applied to the 601 VID OUT and 601
KEY OUT. Press the
SPACE BAR to cycle through
the available settings - 1.0 (linear), 1.4, 1.8, and 2.2.
Hot Key:
601 Digital Sync Generator-equipped systems only.
Hot Key provides a higher-contrast ("Hot") Key Out
signal. When ON, the transparent-to-opaque range is
1 to 1022; when off, it is 64 to 940. Use the
SPACE
BAR
to turn Hot Key on or off.
To Next Page
Loading...