CHYRON Corporation
Buffers & Channels 14-20 Revision D
,0$*(67255HVWULFWLRQV
When MAX!> Preview Output is enabled, the following
restrictions apply:
• The Play List always executes from the Preview Out-
put to AIR. The channel direction specified in the
Play List is ignored.
• If executing a Read Effect causes one or both images
to move (e.g. Push, Hide or Reveal), then both AIR
and Preview Output display the same effect. For
example, if
Push is specified, both AIR and Preview
Output show a Push.
For “stationary” Read Effects (e.g. Wipes and Dis-
solves), where neither image moves, this condition
does not apply.
•If in
Preview Enabled mode (set in the Program
Loader Setup menu), the Thumbnails appear on the
Preview channels. Because there is no cursor chan-
nel on the Preview channels, Thumbnails cannot be
selected by clicking on them.
7KLUG&KD QQHO2XWSXW
L1)L1L72SWLRQ
The Third Channel Output adds more flexibility and con-
trol to the operating environment of the iNFiNiT!. The
Third Channel Output provides a separate output for
CHANNEL B which is displayed on an additional moni-
tor. This option is available to iNFiNiT! systems only.
The Third Channel Option allows you to view the con-
tents of the buffer assigned to CHANNEL B indepen-
dently of the contents of the buffer assigned to
CHANNEL A.
To Next Page