iNFiNiT! Family Operation Manual
Revision D 8-57 Directory Features
[ ] 4. Press CLR, then enter a message ID number
using the Address Keypad.
[ ] 5. Press
CNTL RCD G.
When a Text & Graphics message is read back, it is
important to execute the
READ function while in the
active buffer that is assigned to CHANNEL A (i.e the
CHANNEL in which it was recorded). Otherwise, the
message does not display as you expect.
16
4XLW&RQWURO5HFRUG0HQX
• Press Q or CNTL to close the Control Record win-
dow and return to the Message Compose main menu.
6&6,([SUHVV5HDG5HFRUG2SHUDWLRQV
NOTE
SCSI Express is supported on all
systems running Message Compose
v9.0 and later.
Refer to SCSI Express
documentation for details.
SCSI Express allows for fast Reads/Records of Stills,
CMF, or CLYPS files. A SCSI Express drive can be used
by any program that can access such files, such as
IMAGESTOR!, RGB Tools, etc. Up to four such drives
can be connected. Note that only Stills, CMF, and
CLYPS files may be stored on these drives.
There are two methods for accessing Stills stored on a
SCSI Express drive, described in the following sections.
16. See §15.8.9.2 and §15.8.9.4 for more information on Dual Channel
Text & Graphics Recording.
To Next Page
Loading...