Chyron infinit! series - 10.3 Character Edge and Face Color

CHYRON Corporation
Colors & Palettes 10-8 Revision D
If a potential color problem is detected, the following
message appears on the Prompt Line.
WARNING! - Color selected may be illegal for NTSC (PAL).
NOTE
Do not use colors on-air that fall into
this range without being absolutely
certain they are legal for broadcast!
 &KDUDFWHU(GJHDQG)DFH&RORU
The Palette function is available from the Message Com-
pose main menu.
• Press
CNTL P or select the Palette icon located on
the right side of the Message Compose main menu.
The Palette appears on the Edit Monitor, and the Pal-
ette menu appears on the Prompts Monitor.
To exit Palette mode:
•Press
Q, CNTL or select Quit.
The eight Color Cubes on the Edit Monitor are the cur-
rent face and edge colors stored in the eight Color Keys.
The order from left to right on the Edit Monitor is the
same order on the keyboard. The appearance of these
cubes changes as you enter new colors into the Color
Keys. Additionally, any text on the screen that used the
color(s) stored in an altered Color Key also changes to the
new color.
Color change involves the following procedure:
• Setting
HUE, SAT and INT; or RED, GRN and BLUE
for the face color, then storing the face color in the
Color Key.
• If character edge is involved, using the
Set Edge
function to choose the edge color, then storing the
edge color in the Color Key.