Chyron infinit! series - 15.8.8 EEFB Reset; 15.8.9 Record;Read Text & Graphics; 15.8.9.1 Single EEFB Mode

CHYRON Corporation
Advanced Read FX 15-46 Revision D
 (()%5HVHW
After executing Multiple Effects from a Function Key, if
images remain on screen, or there are problems typing
new characters, the EEFB’s need to be reset.
• Press
CNTL 5.
This procedure is no longer necessary if using Message
Compose v4.0 or later.
 5HFRUG5HDG7H[W*UDSKLFV
Text & Graphics messages may be recorded to and read
from one EEFB. The text is placed in Foreground buffer,
and the graphics are placed in the Background buffer.
Palettes, background, and Output Percentage levels are
also saved in each buffer, and are restored when the Text
& Graphics message is read.
To record to or read from a single EEFB, the Single
EEFB Text and Graphics Message function must be acti-
vated (§15.8.9.1).
This is in contrast to a Standard Text & Graphics read or
record (§8.5.15), where text is placed in one frame buffer
and graphics in a separate frame buffer. A Standard Text
& Graphics read or record is the only way Text & Graph-
ics messages can be read or recorded when using Stan-
dard frame buffers.
 6LQJOH(()%0RGH
To record to or read Text & Graphics from a single
EEFB, the Single EEFB Text and Graphics Message
function must be activated.