Chyron infinit! series - 15.7 Saving;Recalling Read Effects Presets; 15.7.1 Save Fx Presets

iNFiNiT! Family Operation Manual
Revision D 15-23 Advanced Read FX
 6DYL QJ5HFDOOLQJ  5HDG ( IIHF WV 3 UHVHWV
You can save or recall Read Effects presets by using
Save fx and Recall fx. These settings can be recorded as
a message and read back in Message Compose.
Saves 100 (numbered
0 - 99) Read Effects
presets which can in turn be recorded as one
message in a directory.
Recalls a preset Read Effect, from the 100
presets recorded in one message.
Although 100 presets are saved in one message, you
don’t have to set 100 presets before recording the mes-
sage. Additionally, when you record Read Effects presets
in a message, 100 Mix Effects presets are also recorded
in the same message, for a total of 200 effects presets.
 6DYH)[3UHVHWV
To save a Read Effects preset:
[ ] 1. After setting up Read Effects, press
CNTL S or
select
Save fx.
The following window is displayed.
Figure 15-9. Save Fx Presets Window
[ ] 2. Press CLR. Enter a number from 0 to 99, then
press

.
S
Save fx
S
R
Recall fx
R
Save Fx presets
preset number: 0