Chyron infinit! series - 19.6.3 Creating Machine Font Directories Using Copy

iNFiNiT! Family Operation Manual
Revision D 19-19 Disk Utilities
To abort a multi-file Copy:
• Press
ESC. The file currently being copied is fin-
ished, then the Copy process stops.
To exit Copy mode:
• Press
CNTL Q or select Quit.
To exit from Disk Utilities:
• Press
MODE SLCT.
 &UHDWLQJ0DFKLQH)RQW 
'LUHFWRULHV8VLQJ&RS\
You may create Machine Font directories by copying a
file from a known directory (for example,
C/MAX) into
the directory you want to create. Thus, to create a direc-
tory named
C/PLAYERS, you would set up the COPY
window as shown in Figure 19-11.
Set the
FROM: field to an existing directory (C/MAX),
and set the
TO: field to the location and name you wish to
create
(C/PLAYERS). Use the SPACE BAR to cycle
through the various choices in the
FILE TYPE: field until
MACHINE is displayed. Then, enter a known file into the
COPY NAMES: field (in the example, it is message
0010). Press CNTL X to begin the create; a message
(
CREATING DIRECTORY) flashes on the Prompt Line as
the directory is created.
Figure 19-11. Creating Machine Font Directory
COPY
FROM: C/MAX TO: C/PLAYER
FILE TYPE: MACHINE CONFIRM: Y VERIFY: Y
COPY NAMES: 0010