Chyron infinit! series - 9.5 Serial Crawl of Data from External Source

iNFiNiT! Family Operation Manual
Revision D 9-61 Advanced Playback
The following demonstrates how to set up Crawl execu-
tions for some of the above operations:
 6HULDO&UDZORI'DWDIURP 
([WHUQDO6RXUFH
The Serial Crawl function (single row only) is a feature
that is useful for displaying data received from an exter-
nal source using minimal overhead or system delay.
Color, Font, Speed and Ease commands can be sent as
part of a Serial Crawl. Additionally, using the
Echo
command, an external source operator can now receive
&UDZO7\SH 
%DFNJURXQG
1RDQG7\SH
RI%XIIHUV
%XIIHU$VVLJQPHQWV
RGB(A) or Live 2 standard [ ] 1. Press MIX to enter the Mix Control
window (§16.3). In the Mix Settings
window (§16.7), assign one buffer to
Channel A and the remaining buffer to
Channel B.
[ ] 2. Exit Mix Control, then execute Crawl.
RGB(A) 2 EEFB/CCFB [ ] 1. Press
MIX to enter the Mix Control
window (§16.3). In the Mix Settings
window (§16.7), assign one EEFB to
Channel A and the remaining EEFB to
Channel B.
One channel is dedicated to the
Crawl; the other holds the RGB(A)
image.
[ ] 2. Exit Mix Control; execute Crawl.
Live 1 EEFB/CCFB [ ] 1. Press
CNTL R to enter Read Effects
main menu.
[ ] 2. Press
CNTL V.
[ ] 3. Exit Read Effects.
[ ] 4. Execute Crawl.