iNFiNiT! Family Operation Manual
Revision D 13-33 Flash Font
%LWVWUHDP
%LWVWUHDP&RGHV
Family system Codes for the Chyron-supplied Bitstream
Master Fonts can be found in Table 18-4 and Table 18-5.
7\SLQJ% LWVWU HD P&KDU DFW HUV
If creating a Flash Font:
[ ] 1. Enter the Flash Font menu, then enter the
Master Font ID number in the
Font: field.
[ ] 2. Finish setting Flash Font parameters, then quit
the Flash Font menu. Message Compose is
now in Flash Font Typing Mode.
[ ] 3. To type a character not on the Character
Placement Table, press
ALT, the code, then b.
For example, to type the character
°, press ALT
0123 b
. Note that characters that are on the
Character Placement Table can also be typed
using these codes, but there is no reason to do so.
All numerical information must be entered
using the Address Keypad.
If a message contains a Bitstream Flash Font:
[ ] 1. From the Message Compose main menu, read
the message.
[ ] 2. Place the cursor on one of the Flash Font
characters, then press
COLOR FONT. The
Flash Font is loaded.
[ ] 3. Continue with Steps 1 and 2 above.
To Next Page
Loading...