CHYRON Corporation
Advanced Playback 9-14 Revision D
5ROO 7XWRULDOV
The following describes how to create a Roll Control
Buffer List.
• Enter the Message Compose main menu and
record Full Page (§8.4.2), Text Only (§), End of
Text (§8.5.2) or Single Row (§8.5.3) messages at
addresses
100, 101, 102, and 103. For this
example, use the same fonts in all four messages.
To display the Roll Control Buffer (Figure 9-1):
• Press
CNTL or SETUP, then ROLL.