CHYRON Corporation
Total Motion Control 23-32 Revision D
If the SCSI Express drive setup is modified, it does not
override the current settings until Message Compose is
exited and re-entered.
5HFRUGLQJD&0)R U-3(*
5HFRUGLQJD&0)$QLPDWLRQ
The clip can be recorded to a SCSI Express message
directory as a Chyron Motion File (CMF). In point, Out
point and Loop value are recorded as well. To record a
CMF:
[ ] 1. Press
RCD or select Record. The CMF
Message Record window (Figure 23-9) is
displayed.
Figure 23-9. CMF Message Record Window
[ ] 2. If necessary, perform any or all of the
procedures in this step:
• Enter a new
Drive: letter.
• Select
List to list the files on that drive.
• Enter a new
Directory:
•Enter a Description:
[ ] 3. Press CLR; enter an unoccupied message
number; then press
RCD or select Record. If
an attempt is made to record over an existing
file, a warning box appears asking for
To Next Page
Loading...