iNFiNiT! Family Operation Manual
Revision D 2-27 Installation
• Composite Video and Component Video outputs are syn-
chronous to within 5 nanoseconds.
• The design includes improved sinx/x filters for the video
and key signals. These filters are used for both the Com-
posite and Component Video outputs.
• A blanking filter has been added to pre-filter the rising and
falling edges of blanking when a full screen background is
present. This filter limits “ringing” into and out of blank-
ing to less than 2%.
• Support for “Superblack” on Composite and Component
Video outputs has been added.
)DFWRU\3UHVHWV
Encoder II boards are factory set to appropriate NTSC or PAL
standards for Composite Video, Component Video and sync
level.
These adjustments are also preset at the factory:
• Video, sync and key signals timed together to
within 5 nanoseconds.
• Component Video outputs set to GBR.
• Sync is on the GREEN output.
• There is no Color Edit information on the
Component Video outputs.
• Superblack option is disabled.
For both Channel 1 and Channel 2, the Composite and Compo-
nent Video are timed together within 5 nano- seconds. Chan-
nel 2 timing is within 5 nanoseconds of Channel 1. This timing
is not variable.
9LGHR6LJQDO2 SWLR QV
These adjustments to Component Video will not affect Com-
posite Video output.
[ ] 1. GBR or YUV Component Video output are
selectable.
Jumper 1-2 for YUV. Move jumper to 2-3 for GBR.
• Channel 1 is controlled by JP28
• Channel 2 is controlled by JP15
[ ] 2. The Component Video signals can have Color Edit
information added.
To Next Page
Loading...