Chyron infinit! series - 9.3.1.1 Roll (R)

CHYRON Corporation
Advanced Playback 9-4 Revision D
two cursor positions to the right of the command column,
containing numerical data such as Speed, Time, or mes-
sage ID numbers.
The list displays 16 steps at a time. The list can contain a
maximum of 100 steps (numbered
0-99). There are two
ways to scroll through the list:
• Use the cursor
ÎÏ keys.
• Press
SHIFT PAGE + ÎÏ to “turn” the pages of
the list.
The commands are outlined in the following sections.
Enter all numeric data using the Address Keypad.
 5ROO5
Roll specifies which message(s) to roll. In a Roll com-
mand, a single message or a range of messages can be
specified. Additionally, the same message(s) can be
specified multiple times in the list.
To specify a message to roll:
[ ] 1. Press
ROLL or R.
[ ] 2. Enter the ID number of the message to be
rolled, then press

.
To specify a range of messages to roll:
[ ] 1. Enter the ID number of the first message to be
rolled, then press
Í.
[ ] 2. Enter the ID number of the last message to be
rolled; then press

.
NOTE
The Roll message and the text
messages specified in the Roll
Control Buffer List MUST be stored in
the SAME Directory, i.e. the current
directory, or the Roll Control Buffer