CHYRON Corporation
Multiple Effects 17-42 Revision D
The Multiple Effects message loads.
Initializing Frame Buffer, Multiple Effects
loaded
, then Multi FX, multiple effects read
display on the Prompt Line one after the other
as the message is loaded. When this series of
prompts is completed, you can execute at any
time.
[ ] 2. Press
F1. The effect executes instantaneously.
NOTE
Each time you use a Function Key to
trigger Multiple Effects execution, the
Multiple Effects message must be
read (loaded) first, or the effect will
not execute properly.
See Section 12 for more information on programming
Function Keys.
,QVWDQWDQHRXV0XOWLSOH(IIHFWV
([HFXWLRQ8VLQJWKH'2.H\
You can preview, then instantaneously execute Multiple
Effects by using the
DO key as follows:
[ ] 1. While in the Multiple Effects main menu, press
CNTL X or select Execute to execute the
Multiple Effects.
[ ] 2. Press
DO to re-execute the Multiple Effects.
This re-execution may look different as images
that were in the frame buffers are swapped
with the contents of the
READ NEXT buffers.
For example, what faded in after pressing
CNTL X will have now faded out, or what was
on screen may have been pushed off.
Multiple Effects can now be executed on cue:
[ ] 3. Press
DO.
To Next Page
Loading...