Chyron infinit! series - 9.8 Machine Control Option (DDR)

iNFiNiT! Family Operation Manual
Revision D 9-81 Advanced Playback
The following commands can be used during a Two Part
Slow Reveal:
 0DFKLQH&RQWURO2SW LRQ''5
iNFiNiT! Family systems can control a DDR (Digital
Disk Recorder) from within Message Control. A DDR
clip can be added to an IMAGESTOR! database and Play
List. A DDR clip can also be played back as part of Mul-
tiple Effects execution (§17.4.2). See the IMAGESTOR!
Option Handbook (Pub. No. 2A01987) for more informa-
tion on DDR clips.
A serial port on the system must be configured for DDR
use. This configuration is accomplished through the
Set
Com
function in the Program Loader Setup menu
(§3.6.6). In addition, the iNFiNiT! serial port must be
physically modified to accommodate the DDR.
Table 9-14: Two Part Slow Reveal Execution Commands
.H\VWURNH &RPP DQG
Enter a new speed from
1 to 9 using
the Address Keypad.
Changes the speed of the Two Part
Slow Reveal at any time
Press
0. Pauses a Two Part Slow Reveal Slow
Reveal in progress
Enter a speed from
1 to 9 using the
Address Keypad.
Restarts a Two Part Slow Reveal
Press
ESC. Stops a Two Part Slow Reveal in
Progress
Press the
SPACE BAR, then enter a
speed from
1 to 9 using the Address
Keypad each time you want to slow
reveal a line.
Enables Line-by-Line Slow Reveal
(§9.7.3)