Chyron infinit! series - 14.8.5 iNFiNiT! Input Switching Dual Users, Three Frame Buffers

iNFiNiT! Family Operation Manual
Revision D 14-37 Buffers & Channels
In this system, each operator has access to one buffer and
one channel. Therefore, the
CHNG, CNTL CHNG func-
tions do not operate.
 L1)L1L7,QSXW6ZLWFKLQJ
'XDO8VHUV7KUHH)UDPH%XIIHUV
A three buffer system (Figure 14-10) is divided into two
partitions when in Dual User mode. One partition, allo-
cated to the Primary User, is configured as two 2:1
(2 input:1output) switchers.
The input to each of the Primary User’s switchers
(CHANNEL A or CHANNEL B) can be FB-A, FB-B or
black. The second partition, allocated to the Secondary
User, is configured as one 1:1 (1 input:1 output) switcher.
The input to the Secondary User’s switcher (PREVIEW)
is FB-C or black.
)XQFWLRQ
$FWLYH
%XIIHU
2WKHU&+$11(/6
RU35(9,(:
Default
Settings on entering
Message Compose.
CHANNEL B AIR is
unassigned.
Primary User
1 A AIR
-
Secondary User
2 PREVIEW
-
CHNG Disabled - -