iNFiNiT! Family Operation Manual
Revision D 6-15 Message Compose Basics
can then be displayed by again pressing CNTL READ
NEXT.
Each following message can be displayed by
again pressing
CNTL READ NEXT. Each time CNTL
READ NEXT
is executed, the required fonts are loaded
for each message.
NOTE
CNTL READ or CNTL READ NEXT
operations may replace fonts already
loaded into particular Font Key
positions with the fonts that are
imported with the new message(s).
For example, Message 0000 has fonts
loaded at positions 1, 2, and 3.
Message 0001 has fonts loaded at
positions 1, 2, and 4. When CNTL
READ and CNTL READ NEXT are
executed, Fonts 1 and 2 are replaced;
Font 3 is left undisturbed; and Font 4
is loaded into the previously empty
position.
'LUHFWRU\'HIDXOWV/RDG
Directory Defaults (§8.2.2.4) contains an entry that
allows you to save the currently loaded fonts along with
the message directory in which you are currently working.
[ ] 1. Press the
SETUP key, then select the Defaults
icon or press D.
[ ] 2. Enter
Y in the Fonts: field.
[ ] 3. Press
CNTL Q to exit and save settings.
When
Fonts is set to Y, the fonts currently loaded in a
message directory automatically reload each time that
message directory is selected as the current message
directory.
To Next Page
Loading...