CHYRON Corporation
Flash Font 13-48 Revision D
Logo Compose or derived from a Bitstream™ Master
Font. In addition, two light sources can be independently
positioned, and various parameters for each light source
can be set.
All color assignments must be done before a 3D conver-
sion is started. The front face of a 3D object is assigned
the current character color, the side polygons are
assigned the current edge color, and any shading selec-
tion use the current subpalette on-line.
After a 3D object has been converted, its color can no
longer be changed using the Palette function in Message
Compose.
'(IIHFWV2YHUYLHZ
To enter 3D Mode:
• Press
T or select 3D.
The 3D Utility window (Figure 13-27) is displayed on
the Prompts Monitor. The prompt
Reading master font
data
also appears briefly.
To Next Page
Loading...