CHYRON Corporation
Formatting & Editing 7-54 Revision D
Flash message from the Message Compose main
menu. You must enter the Flash Setup Mode,
enter the address, then press READ.
NOTES
Reading a Flash message puts the
Flash message into the current buffer.
The contents of that buffer are
overwritten by the Flash message.
You CANNOT type in a buffer that
contains a flashing message.
When a Flash message is displayed,
the buffer becomes exclusively
dedicated to the Flash message. The
Flash message cannot be erased
from the screen (or the buffer) until
you enter the Flash window and turn
the flash Off or exit the Flash window
by pressing Q or CNTL. You can then
re-enter the Message Compose main
menu, and erase the screen (and the
buffer).
7KLQJVWR5HPHPEHU$ERXW)ODVK
• Flash messages can be put in the background simul-
taneously ONLY in three buffer Single User systems.
• Flash messages CANNOT be used in any effect, e.g.
Rolls, Crawls, Slow Reveals, Read Effects or Mix
Effects. They also cannot be converted to/from
SCRIBE format.
To Next Page
Loading...