Chyron infinit! series - 3.6.4.3 Saving;Recalling iNFiNiT! Sync Settings; 3.6.4.4 MAX!> Video Setup

CHYRON Corporation
Start-Up 3-18 Revision D
 6DYLQJ 5HFDOOLQJ
L1)L1L76\QF6HWWLQJV
To save the sync settings:
[ ] 1. Press
RCD. The Enter Sync Filename window
is displayed.
Figure 3-14. Enter Sync Filename Window
[ ] 2. Enter a filename for the settings, up to 12
characters long (iNFiNiT! Family filenames
are alphanumeric, but must start with a letter
and contain no spaces.) Press

to save the
settings.
NOTE
The power up default sync settings
are read from a file named SYNC.DEF.
To change the default, record your
settings using this file name.
To recall sync settings:
• Press
READ while in the Sync Setup window, enter
the filename, then press

.
 0$;!9LGHR6HWXS
Set Video lets you adjust sync, choose sync and genlock
sources, and set the MAX!> software for digital video via
the CCIR601 interface option (Figure 3-15).