Chyron infinit! series - 16.16 Xform Enble (Transform Enable)

iNFiNiT! Family Operation Manual
Revision D 16-29 Mix Effects
 ;IRUP(QEOH7UDQVIRUP(QDEOH
Xform Enble is available only on systems equipped with
the Transform option. If the system is not equipped with
Transform, windows, menus and icons specific to Trans-
form do not appear.
Xform Enble allows you to choose how a Transform
Script is displayed when executing Multiple Effects (Sec-
tion 17). There are four possible settings:
Frame Prior-
ity
, Transform Priority, Frame Only and Transform
Only
. The Xform Enble setting is reflected in the Trans-
form window (§17.6.3) in the Multiple Effects main
menu. The default is
Frame Priority.
To set Transform Enable:
[ ] 1. Press
CNTL X or select Xform Enble.
The Transform Control window is displayed.
Figure 16-11. Transform Control Window
[ ] 2. Using the SPACE BAR or the mouse, toggle to
the desired
Frame Priority choice.
Transform Control’s setting is reflected in the
Pri: field in
the Transform window in Multiple Effects.
Frame
Priority
Text and/or graphics message(s) are displayed over
the Transform Script.
Transform
Priority
The Transform Script is displayed over the text and/or
graphics message(s).
Frame Only
Only text and/or graphics messages are displayed.
Transform
Only
Only the Transform Script is displayed.
Transform Control
Frame Priority