Chyron infinit! series - 6.6.1 Manual Font Load Procedures

iNFiNiT! Family Operation Manual
Revision D 6-13 Message Compose Basics
• Automatic font load using CNTL READ or CNTL
READ NEXT
• Automatic font load upon selecting a directory. This
is set in Directory Defaults (§8.2.2.4).
 0DQXDO )R QW /RDG 3URFHGX UHV
NOTE
iNFiNiT! Family systems may load up
to 16 Machine Fonts simultaneously.
Eight Font Keys are provided on the
keyboard. To load or access Font
Keys 9 - 16, press ALT followed by the
Font Key. For example, ALT Font Key
1 accesses Font 9.
To scroll through the list:
•Use the Cursor
ÎÏ keys or the scroll bar control on
the right side of the display.
To page through the list:
• Press/Hold
SHIFT PAGE + ÎÏ.
To return to the top of the list:
• Press
HOME.
Note that the Address Display at the bottom of the menu
and the highlight bar in the list show the same ID num-
ber.
To load a font, use one of the following methods:
• Highlight the desired font, then press a
Font Key or
ALT Font Key on the keyboard to load the high-
lighted font. Follow the same procedure for each of
the remaining fonts.
• Press
CLR; enter the Font ID number into the
Address Keypad, then press the respective
Font Key
or
ALT Font Key.