Chyron infinit! series - 20.5.12 Help (?); 20.5.13 Quit (Q); 20.6 Configure Video Input (C)

iNFiNiT! Family Operation Manual
Revision D 20-15 Video Input Option
• If the offset was set while in Frozen mode, press
Video Input Video Freeze to see the adjustment.
• If the offset was set while in Video Input (live video
is streaming in), press
Video Freeze Video Input
Video Freeze
to see the adjustment.
 +HOS"
• Press ? or select Help for a brief description of each
item on the Video Input Control menu.
 4XLW4
Press Q, select Quit or click the right mouse button to
exit from the Video Input Control menu.
 &RQILJXUH9LGHR,QSXW&
The Configure (C) icon is displayed on analog VIM
iNFiNiT!, all MAX!>, and all MAXINE! Video Control
Menus.
This item allows you to set the RGB Gain and Black
level for the incoming analog input video, and/or adjust
CCIR601 digital video input parameters.
NOTE
To correctly adjust the VIM, first
confirm the output level of the
system. Then, confirm the levels of
the source image by itself; finally
input the source image through the
VIM and adjust the VIM accordingly.
When selected, this item displays the Video Input Con-
figuration menus. (These are slightly different for each
specific system).