iNFiNiT! Family Operation Manual
Revision D 2-31 Installation
The master timing for each channel will shift all of the above-
mentioned signals. They do NOT adjust the video timing and
are usually set to line up with the video. All 16 settings of these
switches produce different amounts of delay.
Coarse Key delay will add 250 nanoseconds of delay/position
for the key signal. Fine key timing will advance the timing of
the key signal 18 nanoseconds/position. Coarse key delay only
has 4 settings and repeats every 4 positions on the switch. Fine
key timing has 16 unique settings.
The last 2 switches adjust Luma/Chroma delay for the compos-
ite video output.
L1)L1L7&&,5'LJLWDO9LGHR
2SWLRQ$GMXVWPHQWV
L 1)L1L72YHUYLHZ
The CCIR-601 (“601”) digital video option enables you to input
or output CCIR601 digital video from the iNFiNiT! system.
MAXINE! 601 adjustments appear in §2.8 on page 2-35. No
hardware adjustments are required for MAX!> 601.
NOTE
This option normally handles Parallel 601
video; an additional option is available to
provide Serial 601 video.
S1 Channel 2 Master timing S2 Channel 1 Master timing
S7 Channel 2 Coarse key delay S10 Channel 1 Coarse key delay
S3 Channel 2 Fine Key timing S6 Channel 1 Fine key timing
S15 Channel 2 Luma delay S16 Channel 1 Luma Delay
To Next Page
Loading...