Chyron infinit! series - 21.5 Full Screen (X)

iNFiNiT! Family Operation Manual
Revision D 21-7 RGB Tools
• You cannot use the keyboard to scale the Crop Box
and keep the aspect ratio constant. This must be
done using the mouse as described above.
To reset the Crop Box to default settings:
• Press
R or select Reset.
To exit the Crop Box Adjust window:
• Press
Q or CNTL, or select Quit to exit and save
changes.
• Press
ESC to exit the Crop Box Adjust window with-
out saving changes.
To record the size and location of the box as a Crop Box
message:
• Enter a message ID number, then press
RCD.
 )XOO6FUHHQ;
This is a toggled function which can be either On or Off.
Press
X or select Full Screen.
When
Full Screen is On, the Crop Box appears at the
outer limits of the display, and may not be visible unless
your monitor is set to underscan. The actual size of the
Full Screen Crop Box is a little larger than the displayed
box, because of certain frame buffer characteristics.
The Edge tool cannot be used when
Full Screen is On,
because placing an edge outside the limit of the screen is
meaningless. The Scale tool has some restrictions if
Full
Screen
is On: a Full Screen image can be scaled down;
however, blowing up a smaller image to Full Screen size
may not yield good results.
NOTE
Recording Full Screen RGB mess-
ages consumes relatively large
quantities of disk space. For
example, a typical NTSC Full Screen