iNFiNiT! Family Operation Manual
Revision D 9-33 Advanced Playback
&U DZ O
NOTE
Make sure that Word Wrap is off when
creating messages used in Crawls.
Crawl setup is a three-part procedure.
• A message or messages are created and recorded.
• A Crawl Control Buffer List is created. This list,
stored in the Crawl Control Buffer can contain up to
100 entries specifying commands such as
Speed,
Pause, Time, and messages to be crawled.
• After the list is completed, it is checked for errors,
loaded, and executed.
Special Roll
RGB(A)
Background
2 EEFB/CCFB [ ] 1. Press
MIX to enter the Mix Control
window (§16.3). In the Mix Settings
window (§16.7), assign one EEFB
to Channel A and the remaining
EEFB to Channel B.
[ ] 2. Read an RGB (A) into Channel B.
One channel is dedicated to the
Special Roll; the other will hold the
RGB(A) image.
[ ] 3. Exit Mix Control, then execute
Special Roll.
Special Roll
Live
Background
1 EEFB/CCFB [ ] 1. Press
CNTL R to enter Read
Effects main menu (§15.1).
[ ] 2. Press
CNTL V.
[ ] 3. Exit Read Effects, then execute
Special Roll.
5ROO 7\SH DQG
%DFNJURXQG
1RDQG 7\SH
RI%XIIHUV
%XIIHU$VVLJQPHQWV
To Next Page
Loading...