iNFiNiT! Family Operation Manual
Revision D 8-43 Directory Features
• To activate a function within the window, press the
appropriate key.
NOTE
The mouse is not supported in the
CNTL RCD window.
Five functions do not appear in the Control Record win-
dow. Instead, they are activated as follows when the
Control Record window is open.
In addition, there are several selective recording opera-
tions that are executed from within other menus or win-
dows. For example, individual Function Keys can be
recorded from within the Function Key Setup menu; sub-
palettes can be recorded from within the Subpalette
menu; etc. These selective recording functions are
described in the sections pertaining to those functions.
Recording [NNNN] appears briefly on the Prompt Line
when recording has been successful.
[NNNN] describes
the information being recorded. When recording is com-
plete, the Control Record window closes automatically
and the Address Readout on the Prompts Monitor and the
Keyboard LCD (if present) increases by 1.
If
XXXX MESSAGE FILE ALREADY EXISTS appears
on the Prompt Line (where XXXX is the selected ID
number), a message already exists at this address.
• Enter a different ID number
To Record: Keystroke
Scanline background message (§10.5) B
Clock (Timer) message (§11.4) C
Clock (Timer) and Full Page message (§11.4) L
Palette (Section 10) P
Slow Reveal (§9.7) SLOW REVL
To Next Page
Loading...