Chyron infinit! series - Page 392

CHYRON Corporation
Advanced Playback 9-50 Revision D
To record the Crawl Control Buffer List:
• Enter an empty address on the Address Keypad,
then press
CNTL RCD CRAWL.
• Continue to §9.4.5 for instructions on how to
execute the Crawl.
Tutorial 4: Creating a Timed Crawl Control Buffer List
The completed list is displayed in Figure 9-11.
6WHS .H\VWURNHV &RPPHQWV
Execute the following step if the Crawl Control Buffer is not displayed. Other-
wise, begin with Step 0.
CNTL or
SETUP
CRAWL
Displays Crawl Control Buffer (Figure 9-9).
0
R 3

Enters number of rows that will be crawled. For
this example, enter
3.
If a
Row command is not entered, the entire Crawl
is executed on one row.
1
T 18

Sets duration in seconds of the Crawl. For this
example, enter
18.
2
CRAWL
or C
110
Í 112

Specifies the first three messages to crawl. For
this example, enter a range of message ID num-
bers from
110 to 112.
3
P 60

Specifies a pause duration in fields. For this
example, enter
60. This pauses the Crawl of mes-
sage 113 for one second (NTSC or PAL-M), or 1.2
seconds (PAL).
4
Crawl
or C
113

Specifies the fourth message to crawl. For this
example, enter 113.
CNTL or Q This exits the Crawl Control Buffer, and returns to
the Message Compose main menu.