iNFiNiT! Family Operation Manual
Revision D 11-11 Clock & Timer Displays
• The font and color currently selected when the Clock
Setup Utility is entered are the ones used by the
Clock or Timer display.
• Time resolution is maintained to 0.01 accuracy, even
if the hundredths position is not displayed on-screen.
• If an “all seconds” (
SS) or “all-minutes” (MM) dis-
play is specified, time increments to
59 and resets to
00. No digits are added to the left.
•
Timer Down can start from a time greater than 59
seconds.
• A time-of-day Clock message is displayed and
started as soon as it is read from the disk.
•
Timer Up/Down messages are displayed when read
from disk, but must be manually started in the Clock
Setup by pressing
S, or in Background Mode in Mes-
sage Compose, by pressing
CNTL 8.
To Next Page
Loading...