CHYRON Corporation
Flash Font 13-6 Revision D
• In Message Compose, place the cursor on a character
that you wish to convert.
CNVRT
(FLASH)
Press CNVRT (FLASH) to display the Flash Font main
menu (Figure 13-2).
If the cursor is on a character, all fields in this window reflect
the current attributes of the character. Any changes to the
character are retained when exiting the Flash Font main
menu. The character also displays changes to font attributes
as they are entered in the menu.
NOTES: The message “CANNOT LOAD MASTER
FONT”
indicates that the selected character’s Master Font
is not available.
You may then set the Master Font ID to a valid Master Font
by pressing
M, TAB or SHIFT + TAB to move to the Mas-
ter
Font: field, entering a valid Master Font ID, then press-
ing
.
If the cursor is not on character upon entry into Flash Font,
the letter A from the Master Font is displayed on the Edit
Monitor.
To Next Page
Loading...