iNFiNiT! Family Operation Manual
Revision D 17-23 Multiple Effects
The length of each of the effects listed above
cannot exceed
300 fields in length. If the length
exceeds
300, the following message appears
when Multiple Effects is executed:
Figure 17-5. WARNING - Length Too Long
FXa designates the specific effect. If you press
Y, the effect proceeds, and the effect defaults to a
length of
300. Otherwise, you can adjust Start,
End or Len.
•Maximum
9999 fields if executing a Roll, Crawl or
Transform. The minimum number of fields depends
on the complexity of the effect. If it cannot be exe-
cuted for this reason, the system displays the follow-
ing warning:
Figure 17-6. WARNING - TIME TOO SHORT
Adjust one or more of the time parameters, then
re-execute Multiple Effects.
When
Len is changed, End also changes by the same
number of fields.
Start remains unchanged. The new
Length and End Point are reflected on the Multiple
Effects Time Line for that effect.
Length can also be set in the Multiple Effects Time Line
window. See §17.7 for more information.
WARNING - Press Y to continue.
FXa - Length Must Be Less Than 300
WARNING - Press Y to continue.
FX-1 - TIME TOO SHORT
To Next Page
Loading...