iNFiNiT! Family Operation Manual
Revision D 21-11 RGB Tools
• To reposition the Scale Box, click and hold
inside the box, then, while still holding the
mouse button down, drag the box to the
desired location. Release the mouse but-
ton.
• To scale the Scale Box without changing its
aspect ratio, click and hold on a selected
corner, then, while still holding the mouse
button down, drag the corner to the desired
location. Release the mouse button.
[ ] 3. Press the right mouse button to move the
cursor back to the Prompts Monitor.
You can also press any key except
CAPS
LOCK
, either SHIFT key, the key in the center
of the cursor keys,
SHIFT CHAR, SHIFT
PAGE
, or SHIFT ROW to move the cursor back
to the Prompts Monitor.
Keyboard • Press the SPACE BAR to toggle between top and
right side adjustment; or bottom and left side adjust-
ment.
• Use the cursor keys to adjust the top and/or right
sides; or the bottom and/or left sides.
• Press
SHIFT CHAR + Î, Ï, Ì or Í to move the
Scale Box to a new location.
• Press
SHIFT ROW + Î, Ï, Ì or Í to scale the
Scale Box without changing its aspect ratio. Note
that when this method is used, the bottom left corner
of the Scale Box remains stationary. If it is necessary
to expand or shrink from any of the other three cor-
ners, use the mouse as described above.
Default value for both
X and Y ratios is 1.000, which is
the image's original aspect ratio. To reset the Scale Box
to default settings:
• Press
R or select Reset.
To Next Page
Loading...