iNFiNiT! Family Operation Manual
Revision D 21-25 RGB Tools
are not used and video is displayed at 100%. If
the
Transparency icon is highlighted, the Mix
Output Percentage settings are used.
To select/deselect the
Transparency function:
• Press
T; place the cursor on the Transpar-
ency
icon, then press
or the SPACE
BAR
; or click on the icon. If the Transpar-
ency
icon is highlighted, Mix Transparen-
cies WILL be used
is displayed on the
Prompt Line. If the
Transparency icon is
not highlighted,
Mix Transparencies
WILL NOT be used
is displayed on the
Prompt Line.
[ ] 3. Press
DO or X or select Execute.
The order in which frame buffers are merged
depends upon the settings in the Mix menu.
The screen is erased, and the system performs
the following procedure to merge the buffers
into the current frame buffer:
• If a buffer is assigned to PREVIEW, it is
written to the current frame buffer.
• If a buffer is assigned to CHANNEL B, it
is written to the current frame buffer.
• If a buffer is assigned to CHANNEL A, it
is written to the current buffer.
This order of merge is defined by the following
rules:
• Any buffer assigned to CHANNEL A has a
higher priority and displays on top of the
one assigned to CHANNEL B.
• The CHANNEL B buffer has a higher pri-
ority than the buffer assigned to PRE-
VIEW.
• In Dual-User mode, the PREVIEW chan-
nel is ignored.
To Next Page
Loading...