CHYRON Corporation
Total Motion Control 23-24 Revision D
NOTE
Due to SCSI drive architecture, the
following conditions must be met:
•The Width of the Crop Box
must equal a multiple of 16.
•The Height of the Crop Box
must equal a multiple of 2, 4,
8 or 16, depending on the
Width.
•The Width x Height must equal
a multiple of 256.
If any of these three conditions are
not met, the system automatically
adjusts the Height, and if
necessary, the Width.
[ ] 4. Press CNTL or Q, or select Quit to exit the
CMF Crop window and save changes.
If the Height has been automatically adjusted
by the system, quitting the CMF Crop window
redisplays the CMF Crop window with the
adjusted Height for user review.
If the Width has been automatically adjusted as
well, quitting the Height-adjusted CMF Crop
window will cause it to redisplay with the
adjusted Height and Width for user review.
Quitting again exits the CMF Crop window
and returns to the Configure menu.
CMF Record Window abc x def appears on
the Prompt Line, where
abc is the horizontal
dimension, and
def is the vertical dimension of
the Crop Box. Crop Box setup is now
complete.
To exit the CMF Crop window without saving
changes:
• Press
ESC.
To Next Page
Loading...