iNFiNiT! Family Operation Manual
Revision D 8-13 Directory Features
Function Keys: System Default - N
If set to Y, saves all keystroke sequences currently loaded
in all ten of the Function Keys to be reloaded whenever
that directory becomes the current directory.
If set to
N, the Function Keys are empty when that direc-
tory becomes the current directory.
InterRow Space %: System Default - 100
Indicates the percent of the font height that separates one
row from the next and can be set to any whole number
value from
1 to 999. Inter-row spacing is also known as
line leading.
For example, a value of
100 indicates that each row is
separated from the previous row by the current font
height. A value of
75 indicates that each row is separated
from the previous row by 3/4 (75%) of the current font
height.
The new interRow Space is applied only when the screen
is erased, or a new row is created. It does not affect exist-
ing pages.
Load Fonts During READ: System Default - N
If set to Y, the fonts used in a message when the message
was recorded are automatically loaded when the
READ
function is used. This eliminates having to use the CNTL
READ
function (§8.4.8). The font directory that con-
tains these fonts MUST be the current font directory.
If set to N, allows a message to be read without disturbing
currently loaded fonts. Use
CNTL READ to read a mes-
sage using fonts that are not currently loaded.
To Next Page
Loading...